800.435.9350
Email Us
Home
Services
Traction Motors
Electric Motor Rebuilding
Electric Motor Rewinding
Rotating Apparatus Services
Custom Machining
Testing
Sales
About Us
Literature
Certifications
Repair Projects
Contact Us
Request a Quote
Powering
today’s
Rigs
for tomorrow’s
Energy
All Categories
>
Traction Motors
>
C75ZB(E)-F
Printable Page
Email This Page
Save To Favorites
Please wait…
DC Hi-Torque Drilling Motor
larger image
The
Joliet C75ZB-F Series Wound Reconditioned High-Torque Drilling Motor
delivers a continuous rating for mud pump and rotary table applications of 1085 HP and intermittent rating for drawworks applications of 1320 HP. Continuous rating is at 750 VDC, 1150 Amperes, 965 RPM.
The
Joliet C75ZE-F Shunt Wound Reconditioned High-Torque Drilling Motor
delivers a continuous rating for mud pump and rotary table applications of 1130 HP and intermittent rating for drawworks applications of 1365 HP. Continuous rating is at 750 VDC, 1185 Amperes, 1040 RPM.
Specifications
C75ZB(E)-F Features
Approximate Weight: 7,225 lbs., 3275 kg|
ISO 9001:2000 Quality Program|
Shrink-wrap w/Desiccant|
12/18 Month Warranty|
Reconditioned
Self excited Series field (C75ZB-F Model)|
New
Separately excited Shunt field (C75ZE-F Model)|
Reconditioned
Class H Insulation|
New
Intertec Space Heater: 120 or 240 Volts, Explosion Proof, 150 Watts|
New
Brushes (C130 or T900)|
New
Bearings (FAG or SKF)|
New
Crouse-Hinds Auxiliary Lockout Switch, Explosion Proof|
New
Dywer Pressure Sensor, Explosion Proof|
New
Bolt On Chain Bosses (PE)|
New
Radial Constant Pressure Brush holders|
New
Factory Drilling Frame|
New
Cushioned “Export Spec.” Shipping Skid|
New
Pressurized connection box mounted on left side of motor as viewed from commutator end, with double bolt-on or plug-in armature cable connections and terminations for space heater, auxiliary switch, and pressure sensor. Connection box     can be specified on right side|
New
Blower Assembly: 10 HP or 15 HP, Explosion Proof, 3 Phase, 60 Hz., 460 or 575 VAC, Providing 2800 CFM of cooling, 40°C or 55°C Ambient|
Reconditioned
GE™ Single shaft extension with
New
Oilfield Hub|
Precision Dynamic Balance, better than ISOG2
C75ZB-F Additional Specifications
Force Ventilated|
Red Oxide Primer Inside & Out with (2) Part Epoxy Paint System, Grey in Color|
New Leads: 646 MCM, shielded, with Pass Thru Terminals|
Inspection Covers: Bolt-on or Snap-on Type|
6620 lb. ft. Torque at 900 RPM (1030 HP)|
6290 lb. ft. Torque at 945 RPM (1130 HP)
C75ZE-F Additional Specifications
Force Ventilated|
Red Oxide Primer Inside & Out with (2) Part Epoxy Paint System, Grey in Color|
New Leads: 646 MCM, shielded, with Pass Thru Terminals|
Inspection Covers: Bolt-on or Snap-on Type|
5995 lb. ft. Torque at 900 RPM (1030 HP)|
5705 lb. ft. Torque at 1040 RPM (1130 HP)
DOWNLOADS
C75ZB(E)-F Hi-Torque Reconditioned Data Sheet
(PDF, 362KB)